Site logo

Vario Press 300.e

  • Stacks Image 1947
  • Stacks Image 1951
  • Stacks Image 1949
  • Stacks Image 1953
  • Stacks Image 2313
  • Stacks Image 2315
  • Stacks Image 9854
Click bars below for information
  • Advanced Press Process

    Advanced Press Process

    Stacks Image 2290
    The patented ADVANCED PRESS™ process ensures a uniform temperature distribution from the temperature sensor of the press furnace to the inside of the press ring. Pressing always takes place within the ideal temperature range for pressing lithium disilicate. Thus hardly any reaction layer is created on the surface. This is enhanced by an extremely short press time. The result is a smooth surface and an enormous time savings!
    * Available only in the VARIO PRESS 300.e version.
  • UNIFORM RING HEATING

    UNIFORM RING HEATING

    Stacks Image 1964
    This simple insert helps counteract the heat loss experience by conventional press ovens by raising the ring up to evenly expose the entire ring to the heating elements. The ring sits on the tripod inside the firing chamber throughout the entire process.
  • Z-Dry Mode

    Z-Dry Mode

    Stacks Image 1971
    Accurate and time-saving

    A virtual sensor adjusts the lift position based on the temperature in the firing chamber and automatically ensures an ideal and constant pre-drying temperature. This feature saves time from the traditional methodology and is much more accurate.
  • Safety Through PFC

    Safety Through PFC

    Stacks Image 1978
    (Power-Fail-Control)

    If the power goes out, PFC is activated! Once power is restored the oven operation is returned to the point of interruption.
  • Touch Glass Dispay

    Touch Glass Dispay

    Stacks Image 1985
    Made of Safety Glass
    The innovative and modern touch glass display is made of impact and heat-resistant safety glass. This has proven to be a clean, comfortable and virtually indestructible solution when compared with a membrane keyboard. We now offer a LIFETIME WARRANTY on the glass!
  • Omni Visible Display

    Omni Visible Display

    Stacks Image 1992
    Optimum visibility from all viewing angles – even at greater distances and under difficult lighting conditions such as bright sunshine.
  • USB Connection

    USB Connection

    Stacks Image 1999
    Simple data transfer and program backup.
Open all
  • Read more about Advanced Press
    Stacks Image 2300
    Lithium disilicate ceramics are increasingly used in the dental laboratory for the manufacture of dental prosthesis. This material is characterized by its high strength. While CAD/CAM processing is an option, pressing technology is more efficient and accessible.
    Unfortunately, the pressing process has been hindered by the sensitive nature of lithium disilicate and the formation of reactive layers caused by the material's exposure to phosphate bonded investment during the traditional heating and pressing process. This reaction layer adds complexity and increases processing time.
    ADVANCED PRESS™ was patented in 2010 and includes an entirely new pressing process. By calculating the thermal behavior between the materials involved in the pressing cycle, a heating curve was developed that vastly improves the result and decreases the process time. The principle is simple and easy to understand.

    Ovens With Advanced Press

    Stacks Image 2311
    Stacks Image 2305
  • Read more about Uniform Ring Heating

    UNIFORM RING HEATING

    Stacks Image 2024
    An efficient heating chamber helps guarantee consistent pressing. To ensure all ring sizes are uniformly heated, the VARIO PRESS 300/300.e are equipped with a larger, high-quality heating element that completely lines the firing chamber with 7 layers of heating coils (see ADVANCED PRESS™ techniques). Zones without direct radiation that cause uneven heating are avoided.
    The ring in the VARIO PRESS 300 is positioned on a tripod insert and is raised inside the firing chamber during the entire work process. This ensures the necessary heat reflection inside the firing chamber and thus perfect pressing.

    Products with Uniform Ring Heating

    Stacks Image 2809
    Stacks Image 2018
    Stacks Image 2805
  • Read more about Z-Dry Mode

    Z-Dry Mode

    Stacks Image 2034
    For optimal pre-drying, to avoid cracks and blisters, it is best to pre-dry at a constant temperature of 130°C. Utilizing the symmetrical lift design, chamber temperature and lift position, the VARIO 200/200ZR maintains the optimal pre-dry temperature. By reading the chamber temperature, the VARIO 200/200ZR will adjust the lift to compensate for any changes in the radiant temperature. The advantages:
     Cracks or blisters are prevented by controlled drying with the
    Z-Dry Mode.

     In subsequent firings you save wait-time thanks to the Z-Dry Mode. The work can be placed on the firing tray well before the programmed start temperature has been attained.

    Ovens With Z-Dry Mode

    Stacks Image 2070
    Stacks Image 2039
    Stacks Image 2043
Open all

Important products that help deliver consistent results.

Hover over the buttons below to learn more.

  • MANUAL

    Stacks Image 29816
  • BROCHURE

    Stacks Image 29821
  • DOWNLOAD
    Accessories

  • My Image

    Zubler remains a premier producer of high quality products designed to evolve with the rapidly changing dental laboratory industry.

  • Georgia
    805 Marathon Parkway Suite 130 Lawrenceville GA 30046
    (770) 921-2131

  • Texas
    16135 Preston Rd.
    Suite 126
    Dallas, TX 75248
    (972) 600-9187