X-mill 220
4 Axis Dry milling for Zirconia, PMMA & Wax.
A workhorse! with sturdy construction for consistent accuracy and performance, day in and day out.
Included with Hyperdent CAM Software, the X-mill 220 is the daily mill for the 98% of the milling you don’t need your 5 Axis mill to be bogged down with! The powerful spindle, user friendly touch screen interface and solid construction will give you great results and consistent performance for years to come.
More powerful than you can imagine
Specifications:
| Dimensions (LxWxH): | 730x720x620mm |
| Weight: | Approximately 180kg |
| Input Voltage: | Single-Phase AC 220V |
| Max Power: | 2.5KW |
| Spindle power: | 1.2kw |
| Axis quantity: | 4 |
| Milling Range: | XYZ: 125/130/80mm A:360° |
| Milling Mode: | Dry Milling |
| Max speed: | 36,000rpm |
| Max Feed Rate: | XYZ:6000mm/min |
| Bur Capacity: | 3 |
| Bur Changing: | Automatic |
| Spindle Cooling: | Distilled Water / Antifreeze Mixture |
| Processing Materials: | Zirconia / Wax / PMMA / Soft Metal |
| Avg Milling Times: | Zirconia: 8-10mins / Wax: 3-5mins |
| Air Pressure Requirements: | Min 6 Bar, 3 Cfm/ Air must be Dry no moisture or oil. |
Included:
CAM Software, Coolant pump, Air hose, compression fittings for air hose, coolant hose, power cable.
